Your goal is to create a new circuit that controls continuous servos. Continuous servos spin 360 degrees in one direction or the other.
You will first build the circuit and program in Tinkercad and then build it in real life.
Goals:
1. wire a servo circuit
2. program a servo
3. see how to make a servo spin either backwards or forwards
4. how to stop and start a servo
Building the circuit in Tinkercad:
This is your final circuit:
When you drag a servo over, you need to switch the servo type to a continuous servo. Click on the servo and change the type to Continuous.
NOW THE CODE!
Here is sample code that will make your circuit run. Type in the code. You do not need to add the comments after the //:
